Title:All in One Dehumidifying Dryer
Author:
Date:2021-08-24 10:43:46
Content:

All in One Dehumidifying Dryer protection device
1. Total power supply overcurrent no-fuse circuit breaker;
2. Fan overload protection;
3. Electric heating over-temperature protection;
4. Alarm of material suction and lack of material;
5. Overheating protection temperature switch;
6. High temperature automatic power-off protection;
All in One Dehumidifying Dryer Working environment
Indoor, dry environment, the maximum temperature should not exceed +45℃, and the humidity should not exceed 80%;
All in One Dehumidifying Dryer Precautions for fan use
1. The fan will generate high temperature during use, so avoid touching the shell to avoid scalding;
2. The motor load current will vary with the air pressure used by the fan. When wiring, install an overload protection switch suitable for this model and use it under the rated full load current to avoid motor burns;
3. In order to prevent hard objects, dust, powder particles, fibers and water droplets from being carried into the fan when the air enters the fan, thereby affecting the efficiency of the fan, this
The machine is designed with an air filter, please clean the sundries in the air filter regularly (recommended once a week);
4. The internal and external surface dust of the fan should be cleaned regularly. If a large amount of dust accumulates, the poor heat dissipation effect will cause the temperature to rise, the air volume to decrease, and the vibration to increase.
Cause mechanical failure;
5. If the operation is not smooth or abnormal noise occurs during use, please turn off the power for maintenance;
Do not use the all in one dehumidifying dryer under the following conditions
1. There is a damaged line;
2. To prevent electric shock, do not run the machine on the wet floor or after the machine is exposed to rain;
3. If the machine is damaged or disassembled, it should not be overhauled and installed by professional maintenance personnel;
4. During the operation of the machine, at least 1m of surrounding space is required. Please protect this device and flammable materials at least 3m away;
5. Avoid vibration and magnetic influence in the work area;


Back to Home