1. Easy control and strong applicability: The drying process can be optimized by adjusting the thickness of the material layer, the rotation speed of the main shaft, the number of harrow arms, and the size of the harrow blade. Each layer of the drying tray can be individually passed through the heating medium or the cold medium.
2. Heating or cooling the material: For example, solar energy, laser beam, electron beam, infrared light, flame, gas, etc. directly radiate the surface of the mold; it can be heated by its own thermal field, and the residence time of the material can be accurately adjusted.
3. Single material flow direction and no back-mixing phenomenon: For example, the oil, water, steam, electric heating element, etc. through the internal pipeline of the mold conduct heat to the mold surface; the second is the heating method based on heat radiation, and the quality is stable.
4. No need to mix: the heating method of the mold surface is the key technology of the temperature control system. After the feeding is stopped, the conveying material scale rake leaves can quickly empty the material in the dryer, and the equipment can be cleaned very carefully. And observe.
5. Dust emission meets the requirements, normal pressure type: Due to the low airflow speed in the equipment, it is difficult for dust to float to the top of the equipment, so the tail gas discharged from the top temperature exhaust port contains almost no dust. |
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274
